Solutions
Automation Solution for Building Integrated PV Modules
Residential Roof
Parking shed
Factory Roof
Building exterior
Equipment Display
① Visual inspection of the front side of slide by turning it over 90 °, then placing the slide in initial position and output. This station is used to check for problems caused by lamination, such as air bubbles, and the back side will be checked after curing.
② Gripping units do not crush or bend slides.
③ Protected by a safety light curtain, which stops all movements when it is blocked/covered and continues only when it is restored.
④ Securely lock the module to prevent falling off during the flipping.
⑤ LED light above equipped, illumination level 1000 LUX.
② Gripping units do not crush or bend slides.
③ Protected by a safety light curtain, which stops all movements when it is blocked/covered and continues only when it is restored.
④ Securely lock the module to prevent falling off during the flipping.
⑤ LED light above equipped, illumination level 1000 LUX.
① Compatible with different junction-box (single or triple-split).
② Multi soldering mode available.
③ High-temperature-resistant soldering head, no tailing adhesive.
④ Long-life soldering head and stable welding quality.
② Multi soldering mode available.
③ High-temperature-resistant soldering head, no tailing adhesive.
④ Long-life soldering head and stable welding quality.
① Potting of the configured A and B glue into the junction boxes to act as a seal. Protecting of the junction box from water ingress.
② Compatible with different junction-box (single or triple-split).
③ Sharing a gluing system with auto framing machine.
② Compatible with different junction-box (single or triple-split).
③ Sharing a gluing system with auto framing machine.
① Palletizing of the modules on the line for at least 4 hours curing.
② Capacity determined line length, customizable.
③ Smooth transport of modules on the curing line without jitter or hysteresis even under full load.
④ Equipped with module detection and anti-crush function.
② Capacity determined line length, customizable.
③ Smooth transport of modules on the curing line without jitter or hysteresis even under full load.
④ Equipped with module detection and anti-crush function.
① Adjustable speed to meet actual production needs.
② Storage of 15/20 pieces of modules.
③ Rubber covered soft platform, non-destructive for coated glass.
④ Equipped with lifting mechanism for lifting and transporting modules to the designated layer.
② Storage of 15/20 pieces of modules.
③ Rubber covered soft platform, non-destructive for coated glass.
④ Equipped with lifting mechanism for lifting and transporting modules to the designated layer.
① Can be placed before lamination or at the end of the production line.
② Defective modules can be automatically recognized through AI calculation after capturing EL images.
③ Multiple cameras scanning system. With the capability to detect various types of defects: hidden cracks, broken grids, false welds, bright and dark cells etc. Missing detection rate < 0.05%, misjudgment < 2%.
④ Equipped with AI-assisted defect identification and mark of location). Saving of measured data to SQL database and uploaded to MES.
⑤ Simultaneous recording of high and low current.
② Defective modules can be automatically recognized through AI calculation after capturing EL images.
③ Multiple cameras scanning system. With the capability to detect various types of defects: hidden cracks, broken grids, false welds, bright and dark cells etc. Missing detection rate < 0.05%, misjudgment < 2%.
④ Equipped with AI-assisted defect identification and mark of location). Saving of measured data to SQL database and uploaded to MES.
⑤ Simultaneous recording of high and low current.
Wuxi Leantaic New Energy Equipment Co.,Ltd.
ADDRESS: No. 674, Chengtang Village, Huishan Economic Development District, Wuxi, Jiangsu Province, China
MOBILE: +86 18014221870(WeChat)
E-MAIL: huangcheng@leantaic.com.cn
Copyright©2024 Wuxi Leantaic New Energy Equipment Co.,Ltd.
